N95 automatic folding mask machine
1. Equipment process flow
N95 automatic disc mask machine is a fully automatic machine used to produce folding mask production line. It adopts ultrasonic technology to weld 3~6 layers of PP non-woven fabric, activated carbon filter material and filter material and other parts. The whole set of equipment can process 3M 9001, 9002, etc. and other folding masks through an integrated automatic folding production process such as non-woven fabric welding, ear strap welding, printing, half-folding, edge sealing, and rolling cutting. The raw materials selected according to the product requirements can produce masks that meet different standards such as FFP1, FFP2, N95, etc. The whole process of production does not require the participation of talents, and the finished product is fully automated.
Automatic unwinding - nose bridge feeding - ultrasonic welding - LOGO pad printing - ear strap welding - folding forming - ultrasonic welding and cutting + finished product output
2. Schematic diagram of the equipment
3. Equipment parameters
1. Adapt to product specifications:
1.1 Adhere 3~6 layers of PP non-woven fabric and activated carbon filter material, and cut out the folded mask body. N95 dish masks are used for occupational respiratory protection, including certain microbial particles (such as viruses, bacteria, molds, Bacillus anthracis, Mycobacterium tuberculosis, etc.).
2. Basic configuration parameters of the device
Power supply: AC220V 50HZ
Air source: 0.5~0.8MPA
Production efficiency: 40~50pcs/min
Production yield: ≥95%
Equipment size (mm): 9300(L)*1300(W)*1900(H)
4. Equipment Features
1. Automatic tension control of raw materials to ensure balanced tension of raw materials.
2. Photoelectric detection of raw materials to avoid mistakes and reduce waste.
3. Frequency conversion control, the running speed of the equipment can be adjusted according to the needs.
4. High degree of automation, simple operation, only need to discharge and arrange finished products.
5. The whole machine adopts sheet metal + aluminum alloy structure, which is beautiful, firm and not rusted.
5. Equipment operation requirements
1. It can realize the manual, automatic and motion switching operation modes, and the fault alarm needs to be displayed on the man-machine interface;
2. Real-time communication with PLC is realized by using industrial computer, man-machine dialogue is realized through touch screen, and each setting operation needs to be simple and convenient;
3. The equipment complies with the national safety standards for electromechanical equipment;
