The automatic printing and labeling equipment for SMD material tray count material is used for finished product labeling of electronic material manufacturers or SMT factory feeding and labeling in the factory; the equipment is connected to the customer's MES system for data docking; the feeding rack is designed with four stations. Material tray station, automatic feeding, automatic positioning of the material tray, CCD or barcode reader scans the "production storage label" and automatically calls out the "factory label" template according to the label information and prints it out. The opposite side of the "Warehouse Label" is posted; the second step of scanning the "Factory Label" can automatically call out the "Customer Label or Internal Label" and print it on the original "Production Warehouse Label". The label information is compared as required, and if it is inconsistent, the defective trays will be automatically removed to the defective product area. Optional: The equipment can choose the labelled trays, put four or five trays into the carton in a stack, and paste the outer packaging label on the carton; after the label is attached, the device automatically folds the carton , and finally blanking for the finished product.
Estimated device dimensions:
3900(L)*2000(W)*2000(H)
Institution Description:
1. The transfer mechanism uses the reclaiming module of the feeding part to grab and place it from the tray at A (the waiting area of the tray) and place it at B (the station of the counting machine). The counting machine will count the remaining materials, and then count The feeder outputs the remaining material data;
2. The reclaiming module of the feeding part puts the numbered trays on the waiting translation module at C, and takes pictures at the bottom of the top camera to identify the old label information;
3. The translation mechanism moves the photo-taking tray to D and attaches a new label;
4. After sticking the label, the feeding mechanism will put the tray into the recycling bin E;
5. The end of the action, the loop action
The silo can hold three small (7 inches) + one large (13 inches)
After the material tray of the current station is taken out, the rotating platform at the bottom of the mechanism rotates 90 degrees and moves to the next station to take the material; after all the four stations have finished taking the material, the equipment will alarm to remind you to reload the material.
