1. Lens attachment efficiency: ≈ 1.5S/PCS

2. Equipment accuracy: ±0.05mm (standard test)

Equipment hard requirements

1. The automation takes up less space and cooperates with customer standard equipment

2. All kinds of institutions and special planes need to run smoothly, and there should be no phenomena such as not taking materials and leaking materials.

3. The equipment should be safe and reliable, easy to operate, and the noise should meet the national first-class standard.

Process flow description 1

1. Manually feed the product carrier into the upper carrier machine, and the upper carrier machine automatically feeds the carrier

2. The carrier passes through the track of the labeling machine and flows to the labeling machine to put the sponge glue and stick the lens.

3. After the lens is attached, the finished carrier will flow out through the track of the labeling machine

4. The vehicle collection machine will complete the vehicle collection of the finished product

5. After a certain number of vehicles are collected, the vehicles are manually taken away

Process description 2

1. The carrier is fed to the upper sponge rubber position,

2. The sponge feeder removes the material and places it on the carrier

3. The carrier is fed to the lens mount position

4. Paste the lens and suction material through the bottom camera, and paste it on the sponge glue

5. The cover film feeder cuts the film and attaches it to the finished product for protection

Technical Parameter

Overall equipment size (length, width and height) ≈3000*1600*1800

Equipment voltage (V) AC 220v 50Hz

Air source pressure (Mpa) >0.6

Mass of the whole machine (kg) >260

Machine power (kw) >2

Floor space (mm²) Same as the size of the equipment The actual layout shall prevail

Equipment performance parameters

Linear motion system positioning accuracy (mm) +/-0.02

Labeling efficiency (S/Pcs) ≈ 1.5S

Equipment accuracy ±0.05mm

MES system function None

The above parameters are for reference only, if you want to know more, please consult the online customer service staff, thank you!

Overall equipment size (length, width and height) ≈3000*1600*1800

Equipment voltage (V) AC 220v 50Hz

Air source pressure (Mpa) >0.6

Mass of the whole machine (kg) >260

Machine power (kw) >2

Floor space (mm²) Same as the size of the equipment The actual layout shall prevail

Equipment performance parameters

Linear motion system positioning accuracy (mm) +/-0.02

Labeling efficiency (S/Pcs) ≈ 1.5S

Equipment accuracy ±0.05mm

MES system function None

The above parameters are for reference only, if you want to know more, please consult the online customer service staff, thank you!