The strapping mask machine generally consists of 8 parts: material tray, frame (with worktable and mask), wrapping strap and flower wheel pressing forming part, mask outgoing part, power transmission part, ultrasonic generator, ultrasonic wave Transducer system, electrical control part. Ultrasonic welding method is adopted, a conveying device is installed on the machine table, and the semi-finished mask is input into the conveying device, which is wrapped by a drawing tube, and then pressed with an ultrasonic flower wheel, and then the bandage is cut off to output the finished product, and the production efficiency can reach every minute. 30-40 pieces, only one person needs to put the mask body on the conveyor belt of the machine during the whole production process, and the follow-up work is completed automatically.

Technical parameters of automatic strapping mask machine

Voltage: 220V

Frequency: 20K

Two sets of ultrasonic systems

Power: 3kw

Output: 90 tablets/minute

Machine size: 1900(L) X 730(W) X 1300(H) mm

Machine weight: 300KG

Features of automatic strapping mask machine

1. The frame is made of aluminum alloy and stainless steel, which is light and beautiful in appearance and does not rust.

2. Automatic counting, which can effectively control production efficiency and production progress.

3. Frequency conversion control, the running speed of the equipment can be adjusted according to actual needs.

4. Pulling the tube into the material, the positioning is more accurate, the width of the raw material can be controlled to the minimum, and the cost is saved.

5. The length and size of the finished product are uniformly controlled, with a deviation of ±1mm, which can effectively control the length of the finished product.

6. The equipment has a high degree of automation and low requirements for operators. It only needs to discharge and arrange finished products.

7. Stable performance and easy operation.

8. The automatic ultrasonic welding wheel is made of imported high-quality steel, the mold has a long life, wear-resistant and durable.

Precautions for installation of automatic strapping mask machine

1. Remove the package and check the surface and parts of the equipment for signs of damage. Check whether the screws are loose, whether the electrical connectors are locked, and whether the accessories are complete.

2. The equipment should be placed on a flat hard surface. The mask strapping machine is required to be at least 0.5 meters away from the heat source, and it is necessary to ensure that there is at least 1 meter of space in the front and back of the mask strapping machine and at least 1 meter on the left and right sides for operation.

3. Check the voltage requirements on the label on the back of the generator box, and make sure the system is well grounded.

4. Connect the device to the power supply, be careful to turn off the power switch first.

The voltage requirements of this machine: AC220V, 50~60Hz.

Voltage: 220V

Frequency: 20K

Two sets of ultrasonic systems

Power: 3kw

Output: 90 tablets/minute

Machine size: 1900(L) X 730(W) X 1300(H) mm

Machine weight: 300KG

/