微信二维码

PRODUCTS

产品中心

公司电话:0769-8166 4889
     13926868913
公司传真:0769-8535 6530
公司邮箱:salesauto@in- techgroup.com
公司网站:www.qin-tech.com
公司地址:东莞市长安镇咸西社区莲湖

产品详情
当前位置: 首页> 产品详情

全国服务热线:0769-81664889

AMM-1-1 Fully automatic one drag one ear strap type flat mask machine

  • AMM-1-1 Fully automatic one drag one ear strap type flat mask machine
AMM-1-1 Fully automatic one drag one ear strap type flat mask machine
  • 分享到
  • 收藏
  • Details
  • Technical Parameter
  • Case show

High-speed automatic one-to-one flat mask machine production line is the latest fully automatic high-speed flat earband mask production line developed by Qin Taisheng, including automatic raw material feeding, automatic conveying, cutting nose bridge, mask edge welding, folding, ultrasonic fusion, molding , cutting, conveying, ear strap welding, automatic discharging and other whole process automation, to complete the whole production process from raw materials to finished masks.

Detail display of one-to-one plane mask machine

1646711510519079593.jpg

Device parameters

1. Adapt to product specifications

The production object is a medical mask, which is mainly composed of three layers of non-woven fabrics. The outer layer is a non-woven fabric with waterproof treatment, which is mainly used to isolate the liquid sprayed by patients. The middle filter layer is made of polypropylene that has undergone electret treatment. Meltblown non-woven fabric;

2. Basic configuration parameters of the device

 

serial number

Specification

technical parameter

Remark

2.1

Rate of qualified products

≥95%

Except for raw materials

2.2

Capacity

100Pcs/Min

±10%

2.3

Dimensions

4100mm(L)*2900mm(W)*1900mm(H)

 

2.4

power supply

AC220V±10%/50HZ

 

2.5

Power r

9KW

 

2.6

ambient temperature

1035

 

2.7

environment humidity

535%HR

 

2.8

air pressure

0.5-0.6MPa

 

2.9

Air consumption

300L/min

 

2.10

personnel

1-2 person


4. Equipment Features

1. Automatic tension control of raw materials. Ensure that the tension of raw materials is balanced.

2. Photoelectric detection of raw materials to avoid mistakes and reduce waste.

3. It can produce three-layer mask body, and the length of the upper surface of the finished product conveyor belt is 1200MM.

4. The device has the functions of total count and batch count, and the number of batch counts can be set arbitrarily.

5. The whole machine adopts sheet metal + aluminum alloy structure, which is beautiful and sturdy and does not rust.

6. Modular and humanized design is convenient for maintenance.

5. Equipment operation requirements

1. It can realize the operation mode of switching between manual, automatic and single-action operation, and the fault alarm needs to be displayed on the man-machine interface;

2. Real-time communication with PLC is realized by using industrial computer, man-machine dialogue is realized through touch screen, and each setting operation needs to be simple and convenient;

3. The equipment complies with the national safety standards for electromechanical equipment;

6. Other requirements

1. Acceptance criteria for this equipment: One week before the completion of equipment assembly and commissioning, the supplier informs the purchaser to prepare the production materials, and accepts them according to the technical requirements.

2. The equipment acceptance is carried out by the technical personnel designated by both the supplier and the buyer to participate in and sign the acceptance report;


上一页
下一页